Dois grupos se uniram para um objetivo comum de ajudar os pilotos com deficiência a voar.
Capítulo EAA 1083 e John Robinson, o fundador da AV84all.org, vai construir um Zenith CH 750 Cruzer em Salisbury, Carolina do Norte. Os membros do capítulo EAA lançaram a compilação no início deste mês no aeroporto de Rowan County (KRUQ). “When I was first contacted by Zenith about helping John with this special project, I felt it was a great chance to help with one of the most important missions of our chapter—to encourage, educate and promote aviation for all,” said EAA Chapter 1083 President Jack Neubacher.
Robinson said he is excited about what the group project will do for his organization.“EAA Chapter 1083 is literally making a dream come true for AV84all.org," ele disse. “Without their help it would take a lot longer to get this project off of the ground and they are making flying for the disabled a reality.” After earning his pilot’s license through Able Flight dentro 2015, Robinson wanted to continue on the journey of making general aviation accessible for all people with disabilities. He formed the non-profit organization, AV84all.org, and this group build project is the first step in allowing pilots with disabilities to form a flying club with a Zenith aircraft. Other goals for AV84all.org include a ground school, trial flights, flight training, simulator sessions, e mais, ele disse. Charles Stites, the Executive Director of Able Flight, is optimistic about the opportunities this project will establish for people with disabilities in many different areas.
“It’s wonderful to see this project come together, not as an Able Flight project, but as an initiative of someone who has been through our program," ele disse. “And it’s especially gratifying that Zenith Aircraft, a company that also supports Able Flight, has generously chosen to work with EAA Chapter 1083 to help make this possible. Tenho esperança de que o sucesso deste projeto inspire esforços semelhantes em todo o país. ” Aeronave Zenith fornecerá uma revisão de engenharia para ajudar a personalizar este Zenith CH 750 Cruzer para melhor atender às necessidades dos pilotos com deficiência envolvidos neste projeto.
“Uma das coisas maravilhosas sobre aviões experimentais construídos por amadores é que eles podem ser totalmente personalizados pelo construtor para torná-los únicos,”Disse Sebastien Heintz, dono da Zenith Aircraft. “O novo EAA Maker Edition do SolidWorks é uma ferramenta que será usada para a personalização dos controles manuais necessários para este projeto de construção de grupo. Este software de projeto auxiliado por computador oferece uma grande vantagem para o proprietário / construtor / piloto ao construir sua própria aeronave, e especialmente para aqueles que têm um propósito específico em mente. ”
Este artigo foi originalmente publicado em Aviationnorthcarolina.com.